Detroit Bikes Bicycle, Руководство пользователя

Страница: 8 / 24

6 –
Detroit, Michigan, U.S.A.
FRONT WHEEL
REMOVAL
1. Turn the quick-release lever located on the front brake caliper
clockwise (Fig 1.1) to loosen tension on the brake cable.
2. Turn your bicycle upside-down placing it so that it rests on the
handlebars and seat.
3. Using a 15 mm combination wrench, loosen both nuts (Fig. 2.1)
on the front axle.
4. Slide the Retaining Washers (Fig 2.2) out of the mount-holes on
the front fork drop-out.
5. Li ft the front wheel from the front fork.
INSTALLATION
1. With the bike resting in an inverted position, place the front axle
in the fork drop-outs. Position the wheel so that it is centered
between the front fork blades.
2. Slide the retaining washer hooks intoz the mount holes provided
on the front fork drop-out. (Fig 2.2) Ensure they are fully seated.
3 Using the 15 mm combination wrench, alternately tighten the
nuts on the front axle. Ensure that the wheel remains centered
between the front fork blades, and that the retaining washers are
fully seated. (Fig 2.1)
4. Turn the quick release lever on the front brake caliper counter
clockwise to apply tension to the front brake cable. Be certain
you have fully rotated the lever to its stop. (Fig 1.1) Ensure that
there is approximately 1 mm of clearance between the wheel and
the front brake shoes.
5. Spin the front wheel to ensure it is properly centered in the fork
blades, and that the wheel is straight.
6. Return the bike to an upright position. Depress the hand lever
fully and attempt to move the bicycle. Th e front tire should not
move while the brake lever is depressed. If the brake does not
stop movement of the front wheel, please take your bike to a bike
shop for service.