16
EN
Operating instructions for the chronograph
Setting the date
Caution: Do not set the date between 9 pm and 1 am.
1. Pull out the crown into the 1st position.
2. Turn the crown-counter clockwise to set the date.
3. After the date has been set, push the crown back to the normal positi-
on.
Setting the time
1. Pull out the crown into the 2nd position.
2. Turn the crown to set the time.
3. Push back the crown to the normal position.
Using the chronograph
1. Press button B to change the watch to the chronagraph-mode. The se-
cond hand stops at the zero position, and changes to the chronograph
1/120 second hand.
2. The chronograph can be started and stopped each time button A is
pressed. The chronograph 1/120 second hand stops at the zero posi-
tion 30 seconds after starting. When button A is pressed to stop the
chronograph, the chronograph 1/120 second hand advances rapidly
to display the measured time.
