Detnov CAD-250, Руководство по настройке

Страница: 61 / 100

61
ENG
8.2.1. Inputs for manoeuvres, events.
1. To add input or output events to the manoeuvre to be configured,
touch the ADD button in the bottom margin of the main screen. The pop-
up screen allows you to choose between:
• an EVENT
• an ACTION
By selecting event, you can establish the inputs to be taken into account
by the manoeuvre. .
By selecting action, you can establish the outputs that must be activated
if the input conditions are met.
The maximum number of manoeuvres between events and output
actions is 100,000.
Please note that the manoeuvre configuration manages events and
not states. The event is the status change. If this coincides with the
established condition, it will activate the outputs.
The CANCEL button lets you abort the manoeuvre configuration process.
2. By pressing the EVENT option, a new floating screen will appear that
lets you choose between:
• an ENTITY
• a TIME CONDITION
The ENTITY is any element in the system hierarchy that belongs to
the local system (current control panel) or the network (any of the
networked system control panels). The entities may be a facility, panel,
loop, area, zone, device, group or virtual mode.
The following example creates a manoeuvre whereby an event on one
panel will execute an action on another networked panel.
The TIME CONDITION lets you establish a period of time for which the
input equation is true and the output action can be carried out.
3. By selecting the ENTITY option, you will access the ENTITY EVENT
configuration screen, where:
REPETITIONS is a numerical condition that indicates the number of
1
2
3
4
5
Repetitions =? 3