DETEWE OPENPHONE 52, Руководство пользователя

Страница: 10 / 25

15 14
Making a Call
Toggling / Conference Calls
call always places the original call
on hold.
Toggling
When you are making a call and
another call is being held you can
alternate between the lines (tog-
gling).
You are making a call. Another call
is being held. Press the
Shuttle
softkey or the
®
key. You are now
connected with the other sub-
scriber.
The
Shuttle
softkey enables you
to alternate between both sub-
scribers. The
Disconn
softkey ter-
minate the call you are currently
making. This then reconnects you
with the subscriber on hold. Replac-
ing the handset disconnects both
lines.
Conference Calls
If you are making a call and another
call is being held, you can set up a
three-party conference call. During
the conference call each party can
hear the other two.
You are making a call.
Another call is being held.
Press the
3-Party
softkey for the
conference call.
The conference call is active.
If you hang up during a conference
call you have set up, this ends the
conference. This disconnects the
lines to the two other parties.
If you have set up a conference and
one of the other parties hangs up,
you can continue to hold a normal
telephone call with the remaining
party.
You can end the conference by
hanging up (see above). Or you can
also switch to toggling (alternating
between the two parties) or termi-
nate the connection to one of the
parties.
Making a Call
Accepting a Waiting Call
Now use the arrow keys to select
whether to deflect the call to a stan-
dard call deflection telephone num-
ber or to a telephone number from
the telephone book.
(Telephone Number)
Reroute
(Deflect)
The telephone number to which
you want to deflect the call can be
selected from the telephone book
as you would when making a call
from the telephone book. You then
press the
Reroute
softkey to
deflect the call.
After initiating the call deflection
your telephone ceases to ring. In
the event that the call deflection
was not possible, e.g. because the
destination is busy, you will see an
error message. Call deflection is an
ISDN function and it can therefore
take several seconds for a reply to
arrive from the network. The calcu-
lation of connection charges varies
according to the network operator
used; normally the caller is billed for
the connection to your line and
your are billed for a connection
from your line to the call deflection
destination.
Rejecting / Accepting a
Waiting Call
If a call comes in for your telephone
number while you are making
another call you hear the call wait-
ing tone in the handset; in addition,
call waiting appears in the display.
Reject
: option not to accept this
"waiting call"
Accept
: accept the "waiting call"
immediately and hold the other
call
HideID (Restrict)
: accept the "wait-
ing call"; hold the other call.
You can now accept or reject the
waiting call, or alternate between
both callers (known as toggling).
You are making a call and hear the
call waiting tone. The telephone
number of the waiting caller
appears in the display.
Press the
Accept
softkey, or the
®
key to accept the new call.
You are connected with the waiting
caller and the original call is held
or
press the
HideID
softkey. This
also accepts the second call (the
original call is held)
or
press the
Reject
softkey. This
stops the call waiting signal. The
signal can continue on other termi-
nals on your ISDN line.
Please note that accepting a waiting