8
M100-AT4 Interface Card
Installation Guide
Installation of the M100-AT4 Interface Card
3. Carefully insert the interface card
in slot
no. 3
. The component side
must face to the right. Ensure that
the card is fitted securely. Do not
insert the card in slot 1 or 2.
4. Close the housing cover. Switch on
the OpenCom 130.
Pin outs
The following illustration shows
the pin assignment of the M100-AT4
Interface Card a/b ports.
Connection of an interface card to
pressure terminals
Type (name) of
the interface card
Slot 3
ab 3/1 ab 3/2
ab 3/3 ab 3/4
