manualshive.com logo in svg

Detectortesters Testifire 1000, Руководство пользователя

Поделиться
Скачать
Detectortesters Testifire 1000 Скачать руководство пользователя страница 4

This symbol on the product indicates that there is a safety hazard.

This symbol on the product indicates that you should read and understand this User Manual 
before using this product.

This symbol on the product warns you of hot surfaces or heat by convection.

This symbol on the product indicates that this part of the device is susceptible to static 
damage.

The crossed-out refuse container symbol on this product or literature indicates that it should not be 
disposed with other business waste at the end of its working life. To help ensure that valuable 
resources are reused and recycled, and to prevent possible harm to the environment or human health 
from uncontrolled waste disposal, please separate this from any other types of waste.

You must read the appropriate sections of the User Manual to understand the nature and 
severity of all the potential hazards present and the action you must take.

Meanings of Symbols and Terms

The following symbols are used throughout this User Manual.

M U L T I - S T I M U L U S   D E T E C T O R  T E S T E R

testifire

®

iii

www.

testifire

.com

Содержание Testifire 1000












































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды