Detector Testers Solo 365, Руководство пользователя

Страница: 17 / 22

17
www. solo -tester.com
2
2
1
1
Figure 13
Figure 16
Do Not Touch
Do Not Touch
Do not touch the contacts on the generator.
Static electricity may cause damage and
contamination of the contacts must be
avoided.
Do not touch the contacts on the battery.
Static electricity may cause damage and
contamination of the contacts must be
avoided.
6.3 Removing the Smoke Generator
1)
Ensure the unit is switched off and the Smoke
Cartridge is removed (Section 6.1)
2) Disengage clip ‘1’ and lift. Repeat for clip ‘2’ to
remove the used generator (Fig. 13)
NOTE:
When replacing the generator, any dust or debris
within the housing can be removed using an air duster. Any
condensation can be removed by wiping with a lint-free
cloth.
6.4 Replacing the Smoke Generator
1)
Insert the generator rmly into the recess,
engaging clips ‘1’ and ‘2’ (Fig. 14)
NOTE:
Once the generator is inserted do not remove it
until it is indicated that a replacement is necessary.
6.5 Removing the Battery for Charging
1)
Ensure the unit is switched off and open the back
cover.
2) Unclip and remove the battery
3) Charge the battery by connecting the USB lead to
the battery and the powered USB socket using
the supplied mains adaptor or suitable source
(minimum 1Amp) (Fig. 15)
NOTE: Do not charge the battery while it is tted in the
unit.
6.6 Replacing the Battery
1)
Once the battery is charged clip into the battery
compartment and close the back cover (Fig. 16)
NOTE: Do not force the battery into place.
Figure 15
Figure 14