Detech EDS REACHER, Инструкция по эксплуатации

Страница: 4 / 18

sens.
pinpoint
ON/OFF
normal
freq.1
heavy soil
tone 2
tone 1
freq.2
disc.
AMD
relic
relic
coins
coins
nugget
nugget
foil
The detector is extremely intuitive and easy to operat е . It is designed to
operate with high quality, stability, sensitivity and detection depth without the
necessity of making manual ground adjustments to the different ground
conditions.
Turn the controls and switches to the red marked positions (Figure 3).
Tone 1/tone 2 and freq 1/freq 2 do
not have red markers, as they
do not influence the normal
mode of detector’s operation.
Tone 1/tone 2 is for a choice
of the sound frequency, which
will be heard when passing
over a metal target.
The
freq 1/ freq.2 is
chosen depending on which
of these two frequencies the
detector is less noisy.
Choose the frequency with
one and the same level of
sensitivity of the device.
When turning the detector
on (with the
on/off control)
it congratulates you with
alternating green and red
lights. Then for a second
the LED indicator will light
in green, if the batteries are charged, and in red if the batteries are
discharged and need to be recharged.
The
sens control has two red zones depending on the type of search
The disc control has two red zones. For coin shooting use the coins zone.
If you want to dig the bigger sized ferrous targets like knives, arrows and
spears, rifles, guns, turn back this control to the
relic position. In this position
the detector will reject only the tiny pieces of wire. For gold prospecting use
the
nugget red zone of the disc . control. Do not increase the discrimination
beyond the foil mark, the detector will start rejecting some thin jewelry and
low conductivity coins or other targets. More detailed description of the
functions of this control will be given in the instructions further on.
The
pinpoint button is also red, but it is not used in the process of searching.
It is pressed only when you want to determine the exact location of the
target. You could see more details about this function further in the manual.
NORMAL MODE OF OPERATION
Figure 3
3