DESSALATOR DUO D60, Инструкция по сборке и эксплуатации

Страница: 15 / 31

DUO-60 v2.3 (01/2021) Page 15
2) Starting-up the watermaker
Set the switch to 12 / 24V or 230V. Once the engine has started, gradually turn the
pressure regulator knob to the right to increase the pressure towards the middle of the
orange zone then continue gradually increasing the pressure until it reaches the green
zone on the pressure gauge.
This pressure build-up procedure should last approximately 1 minute.
Once this procedure is done, your watermaker will start producing fresh water, whose quality
will be checked.
➥
Note : The fresh water yield depends on the temperature and salinity of the sea water.