LBB Series Oven
Owner’s Manual
O
PERATION
Version 13
39
Copyright © 2011 by Despatch Industries.
All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of Despatch Industries, unless for purchaser's personal use.
Table 5. Hi-Limit instrument Setup Parameters.
Code
Name
Description
Settings
inPt
Input type
Select thermocouple type. LBB Series Ovens use type
J thermocouples
J_tC
unit
Process unit.
Select between °C and °F for reading process
temperature
C (or F)
rESo
Display
resolution.
Select location of decimal point on process-related
parameters
No.dP
SHif
PV shift value
(offset).
Moves the display temperature to the oven
temperature
0
Filt
PV filter.
If the process value is unstable to read, increasing this
value steadies the input signal.
0
out1
Output 1
function.
Function of the output. Must be set to Hi. for Hi-Limit
control.
Hi.
o1.Hy
Output 1
hysteresis
value.
Amount of degrees the temperature must be below
the setpoint temperature before the Hi-Limit can be
reset
2.0
HSP.L
Lower limit of
HSP1.
Minimum temperature setting for the Hi-Limit
0 (32 if
F)
HSP.H
Upper limit of
HSP1.
Maximum temperature setting for the Hi-Limit
204 (400
if F)
out2
Second output
Despatch does not use this function
None
diSP
Normal display
format.
Used to select the display in normal condition:
PV = Process Value
SP! = Hi-Limit Setpoint
SAFE = The word “safe” in normal condition
PV
PuHi
Process value
high
Read-Only Data: Maximum process value since last
UNLOCK operation.
None
PuLo
Process value
low
Read-Only Data: Minimum process value since last
UNLOCK operation.
None
t.Abn
Abnormal time
Total accumulated minutes of abnormal conditions
since last UNLOCK operation.
None
5.4.8.
Change Hi-Limit instrument Display from Centigrade to
Fahrenheit
Warning!
Changing program parameters alters the function of the Control.
Proceed carefully and fully understand each parameter before
changing that parameter.