Desoutter EABS12-1100-10S, Инструкция по эксплуатации продукта, Страница: 18 / 24

Operation EN
18 / 24 01/2020
The LED is blinking blue twice at a regular frequency. The tool is synchronized with the system but locked.
The tool is not allowed to run the tightening process.
Go to the system, press the icon "STOP" to visualize the rea-
son why the tool is locked.
The LED is steady blue. The tool is ready to run the tightening process.
Operating Instructions
Starting the tool
Fit the tool with a suitable socket.
Select the appropriate program on the system.
Hold the tool by means of the handle and apply to the fastener to be tightened.
WARNING Risk Of Injury
As the reaction force increases in proportion to the tightening torque, there is a risk of severe bodily injury of the
operator as a result of unexpected behavior of the tool.
►
Make sure that the tool is in perfect working order and the system is programmed correctly.
The white front light illuminates the area to tighten.
Press the trigger to start the tool.
How to reverse the rotation
1 Run reverse button
Press this button.
Red and green LEDs are blinking alternatively.
Apply the tool to the fastener and press the trigger.
How to check the battery charge level
The battery is charged to 90-100%.
The battery is charged to 75-90%.
The battery is charged to 50-75%.
The battery is charged to 25-50%.