Desoutter EABS12-1100-10S, Инструкция по эксплуатации продукта, Страница: 16 / 24

Operation EN
16 / 24 01/2020
Launch CVI CONFIG.
Go to the tree view area.
Create or select a "Factory / Assembly Line / Working area".
Right-click the "Working area" and add a product.
Select ExBC Standalone .
In the box "Tool model", select the tool model. Click Finish .
For example:
Click Parameters / Setup .
Select how the tool will run reverse:
Reverse run reverse The tool starts in reverse direction when the operator presses
the start trigger.
Once the tool has run, the tightening direction is automati-
cally re-activated.
Alternate The tool starts in reverse direction when the operator presses
the start trigger.
When the operator pushes again the reverse button, the tight-
ening direction is selected.
Reverse disabled The tool cannot start in reverse direction.
Tick Sound enabled to activate the tool beep.
Select the
torque unit
: Nm, ft.lb, in.lb, kg.m, kg.cm, oz in.
Select which type of battery pack the operator is allowed to plug to the tool.