_______________________________________________________________________________
DESMI Pumping Technology A/S
3
Tagholm 1
9400 Nørresundby
–
Denmark
Tel: +45 96 32 81 11 Fax: +45 98 17 54 99
E-mail:
1.
PRODUCT
DESCRIPTION
These operation and maintenance instructions apply to the DESMI ESLHT pump in /-17
execution.
The ESLHT pump is designed for horizontal assembly with the pressure flange pointing
upwards. The pump is a single-stage end suction centrifugal pump equipped with stainless
steel shaft, balanced mechanical shaft seal mounted in a separate chamber with cooling ribs
and fan cooling and closed impeller. Between impeller and shaft sealing, a carbon bearing is
built in that is flushed from the pressure side of the pump.
The pump can be used as standard for water with temperatures up to 180°C
– possibly higher
temperatures in agreement with DESMI. Higher temperatures may be permitted if, for example,
any working pressure allowed in the pump housing at the current temperature, pumped liquid,
maximum suction pressure, pump size, speed, current shaft seal and maximum ambient
temperature make it possible. Max. operating pressure and speed ranges are specified in
operational data.
If the pump is to be used for liquids other than water, other rubber types are likely to be used
for O-rings and any other materials for the other liquid-affected parts of the pump - contact
DESMI accordingly.
1.1
DELIVERY
- Check on delivery that the shipment is complete and undamaged.
- Defects and damages, if any, to be reported to the carrier and the supplier
immediately in order that a claim can be advanced.
2.
TECHNICAL
DATA
The pumps are manufactured in various material combinations which are specified in the type
number on the name plate. See below.
2.1
EXPLANATION
OF
THE
TYPE
NUMBER
The pump are provided with a name plate. The type number indicated on the name plate is
built up as follows:
ESLHTXXX-YYY-MR-Z
XXX: Pressure branch diameter, YYY: Standard impeller diameter
M: The material combination of the pump.
R: The assembly combination of the pump.
Z: Other variants
M may be the following:
A:
Casing and shaft seal cover : SG iron ( GGG40 as standard). Impeller: SS
S:
Casing : SS.: Impeller: SS
R may be the following:
17 W180 : Special design for 180°C
Z may be the following:
