4L
4R
4L
Select the side piece with no opening. The side
piece has a frame. Install the side piece with the
hole on the bottom. The interior panel has
wooden pegs (part I) already installed. Install the
interior panel with the opening toward the back
of the box so the holes will be staggered.
4R
Select the side piece with the outer opening. The
piece with the outer opening has a frame around
the opening. Install this piece with the rounded
edge up. The interior panel has wooden pegs
(part I) already installed. Install the interior panel
with the opening toward the front of the box so
the holes will be staggered.
4L and 4R
Screw the two posts into the back piece. Slide
outside piece over the posts. Push the locking
piece into the hole on the piece with the outer
opening. Make sure that the locking hooks are
open so that after it is pushed into the hole, you
can twist it clockwise and the locking hooks will
lock around the posts. Do not overtighten!
5
5
Install the front piece by sliding the front piece
on the side panels over the posts and interior
panel’s pegs. Insert locking screw into the hole
so that the locking screw’s hooks are open to
ensure that it will lock around the post. After
the screw is pushed into the hole, twist it
clockwise and the locking hooks will lock
around the posts. Do not over tighten!
e box. When complete, continue to step 5.
of the box. When complete, continue to step 5.
