5
- Insert one of exiting keys to the cylinder and mark it
4-
5
mm from the surface of cylinder.
- Take out the key and saw o the head of the key fom marked line. You may need some tools like vice, hacksaw etc.
Use a rasp to smooth the edges. DESi accepts no liability for damages.
- Insert modified key to cylinder and verify that it is cut in a proper way.
- Install the
smart lock
on the cylinder where
the arrrows on the key slot point upward
and the modified key is in the
position that
it can be taken out from the cylinder without rotating
(could be either horizontal or vertical.)
- First tighten 4 fixing screws lightly, then tighten them firm.
INSTALLATION (TYPE A)
Follow the steps below to install
smart lock
to the existing cylinder:
4-
5
mm
Cut the key
Keep the modified key in
the position that it can be
taken out. Don’t rotate!
Install the
smart lock
on the cylinder. The arrows on
the key slot should point upward.
Tighten the 4 fixing
screws.
MODIFIED KEY
MODIFIED KEY
Smart Lock Installation, Adjustments Video
https://www.youtube.com/watch?v=KF7SPaxDIws
If your key thickness is thinner
than 2.4mm, please refer to the
'USE WITH THIN KEYS' section
on the last pages.
