DESi HS 102 WKS, Руководство пользователя

Страница: 8 / 20

-
If “ # ” button is pressed, the phone call will be stopped. The system does not call other
phone numbers.
-
If “ * ” button pressed, the system will call the next phone number.
-
If phone closed without pressing any buttons, system will call other phone numbers and then
call back to main number. (voice call could not stopped by other called numbers )
If you want to stop calls with your remote control, press that button
3.6 Arming / Disarming Alarm via Remote Access ( Voice Call Module Included Models
Only)
Dial the phone number connected to device and ring 5 times. After the fifth ring, the system
automatically answers the call and the buzzer sounds will hear then remote access password
has to entered from the phone key pad . When you hear confirming tone , the alarm will be
armed by pressing the button “1” or by pressing button “0” the alarm wil be disarmed.
3.7.
Additional Device Control Options via Remote Access ( Voice Call Module Included
Models Only)
You can control a device like boiler, lighting, etc. connected to your system with an optional
module. The output of the optional module should connect to supply input of the device .
Dial the phone number connected to device and ring 5 times. After the fifth ring, the system
automatically answers the call and the buzzer sounds will hear then remote access
password has to entered from the phone key pad. When you hear confirming tone , the extra
equipment is actived by pressing the button “2” or by pressing button “3” the extra
equipment is deactivated.
8
3.3. Reporting Total Number Of Enrolled Remote Controllers
If you want to learn how many remote controller have been enrolled to your system,
follow the instructions below when the alarm is disabled:
[ ADMIN PASSWORD ] → <MENU> → <0> → < 1 >
The number of controls enrolled to the device will be
reported as shown in the table. The device
automatically exits the program after reporting.
The device can recognize maximum 8 remote
controllers.
3.4. Reporting the Number of Passwords:
To learn the number of passwords defined, follow the
instructions below when the alarm is disabled:
[ ADMIN PASSWORD ] → <MENU> → <0> → < 2 >
The number of passwords defined will be reported as
shown in the table above. The device automatically exits
the program after reporting. The device can recognize
maximum 8 paswords.
3.5. Stopping Voice Call Feature At Alarming:
Defined Password / Remote Controllers