7. GSM MODULE SETTINGS (For GSM connectable models )
If you purchased a product that includes a GSM module, the factory default setting is to make
calls through the GSM line.
You may also want to use a landline on your system. To enable or
disable the landline, follow the instructions below when the alarm is disabled:
[ADMIN PASS.]
→
<MENU/>
→
<4>
→
WARNING TONE
→
<MENU/>
→
<0>
→
<7>
→
{to
enable using landline press <1> butonuna, to disable using landline press <0>}
→
<ENTER/#>
To choose which line the device will use first, follow the instructions below when the alarm is
not activated:
[ADMIN PASS.]
→
<MENU/>
→
<4>
→
WARNING TONE
→
<MENU/>
→
<0>
→
<6>
→
{to
choose landline first
press <1>, to choose GSM line first press <0>}
→
<ENTER/#>
If the dive cannot make a call for any reason over the specified line, the system will switch to
an alternative line.
17
-
First, pin code of the SIM card must be canceled and the SIM
card must be correctly installed on the GSM
module
before the
device is power
on
.
-
After the device is power
on
(15-20 sec.), if the blue LED on the
gsm card starts flashing that means the sim card is working.
!
WARNING
