manualshive.com logo in svg

Desert Star SharkEye, Руководство оператора и техническое справочное руководство

Поделиться
Скачать
Desert Star SharkEye Скачать руководство пользователя страница 19

19

Note:  Images saved on internal hard disks can only be retrieved when an IEEE-1394/FireWire link is used.

6.11 Erasing Stored Images

Images stored on the camera can be deleted by selecting 

Camera Storage/Erase Storage

 from the main menu.  This will

erase either the camera internal hard disk or FLASH memory.  This will permanently delete the images, images can not
be undeleted.

Note:  Internal hard disks can only be deleted when an IEEE-1394/FireWire link is used.

6.12 Negotiating an RS-485/RS-232 Link

A new baud rate or Comm port can be selected through the 

Comm Settings

 dialog.  This window is displayed by

selecting 

Communications/Comm Settings

 from the main menu.

When the window pops-up select the desired Comm port and type, (See the appendix on configuring a Quatech
FastComm card if one is being used.)  The default baud rate (4800 baud) will be automatically selected.  Turn on the
camera and wait about 60 seconds.  The application should detect a link and a notification box will pop-up.  The new
desired baud rate can now be selected.  A negotiated communication link will then be attempted.  If it is successful a
notification box will be displayed and standard operations can commence.  If the negotiated link is not successful, reset
the camera and try again possibly at a slower speed.

Содержание SharkEye




























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды