TB-3081
Page 2 of 6
Features and Components
A. Settings Button:
Press to enter SETTINGS mode.
B. Left and Right Buttons:
Press to cycle through the
menus.
C. Cursor Button:
Press to advance the cursor.
D. Exit Button:
Press to power the meter ON and OFF.
This button is also used to exit SETTINGS and MENU
modes.
E. Start / Stop Button:
Press to start and stop a
measurement. This button is also used to increase the
value of settings when in SETTINGS mode.
F. Ground Jack:
Common point ground for the meter.
Connect the included black ground cord here.
G. Probe / PC Connector:
Connect the included test
probe when taking measurements. Connect the included
DIN to USB cable when exporting data onto a PC.
H. Ground Jack:
Common point ground for the meter.
Connect the included black ground cord here.
I. Ground Touch Plate:
Touch to ground the operator
prior to taking body voltage measurements.
Settings Mode
Press and hold the Settings button for 1 second to enter
the SETTINGS mode. There are 4 menus available:
1. V RANGE
2. CLOCK
3. DISPLAY
4. °C/°F
Press the Left button to move to the previous menu.
Press the Right button to move to the next menu.
Press the Exit button to exit from SETTINGS mode.
V. Range Menu
Figure 2. Body Voltage Meter features and components
I
F
G
H
Adjust the voltage range for new and saved graphs.
Press the Cursor button to advance the cursor, and
press the Start / Stop button to increase the value.
NOTE: AUTO range is only available for saved graphs.
E
A
B
B
D
C
Test Equipment Depot - 800.517.8431 -
5 Commonwealth Ave,
Woburn,
MA 01801
