TB-3006
Page 4 of 4
The High Output Overhead Ionizer’s quiet and gentle fan
is designed so that it will not disturb personnel, paperwork,
or delicate parts. The LED indicator mounted on the face of
the unit allows the operator to easily verify whether it is ON,
OFF, or in need of maintenance. The ionizer’s emitter pin
material will not require replacement during the normal life
of the product.
The High Output Overhead Ionizer is engineered for
efficiency and durability. The unit’s automatic feedback
balancing circuitry eliminates the need for repeated
calibration, making this ionizer highly dependable and cost
effective.
Specifications
Input:
120 VAC - 50/60 Hz, 6A
Ozone:
Less than 0.05 ppm
Airflow:
150-260CFM adjustable
Dimensions:
40"L x 5-1/4"W x 2-3/4"H
Weight:
9.70 lbs
Cord:
7'6" cord set with IEC connector
Mounting:
Five each 1/4"-20 threaded holes on
each end
Testing and Calibration
We recommend at least annual calibration of our ionizers.
Ionizers are tested and calibrated using a charged plate
analyzer or an ionization test kit (ANSI/ESD SP33). ANSI/
ESD S20.20 specifies that the compliance verification
of ionizers be tested per ESD TR53. Standards may be
obtained from the ESD Association, 7902 Turin Road,
Suite 4, Rome, NY 13440-2069, (315) 339-6937. Desco
will be happy to send you information on our model 19497
Ionization Test Kit.
The High Output Overhead Ionizer is calibrated to NIST
traceable standards. Contact our Customer Service
Department for details.
Adjustments
For Audio On/Off and Alarm and Balance Adjustment see
Figure 8.
Calibration Access Hole
(Make adjustments
HERE)
Audio On/Off
Alarm Adjustment
Balance Adjustment
© 2013 DESCO INDUSTRIES INC.
Employee Owned
Warranty
Desco expressly warrants that for a period of one (1) year from the
date of purchase, Desco Overhead Ionizers will be free of defects
in material (parts) and workmanship (labor). Within the warranty
period, a unit will be tested, repaired or replaced at Desco’s
option, free of charge. Call Customer Service at 909-627-8178
(Chino, CA) or 781-821-8370 (Canton, MA) for Return Material
Authorization (RMA) and proper shipping instructions and address.
You should include a copy of your original packing slip, invoice, or
other proof of pur chase date. Any unit under warranty should be
shipped prepaid to the Desco factory. Warranty repairs will take
approximately two weeks.
If your unit is out of warranty, Desco will quote repair charges
necessary to bring your unit to factory standards. Call Customer
Service at 909-627-8178 (Chino, CA) or 781-821-8370 (Canton,
MA) for Return Material Authorization (RMA) and proper shipping
instructions and address. Ship your unit freight prepaid.
Warranty Exclusions
THE FOREGOING EXPRESS WARRANTY IS MADE IN LIEU
OF ALL OTHER PRODUCT WARRANTIES, EXPRESSED AND
IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE WHICH ARE SPECIFICALLY
DISCLAIMED. The express warranty will not apply to defects or
damage due to accidents, neglect, misuse, alterations, operator
error, or failure to properly maintain, clean or repair products
.
Limit of Liability
Electronic ionizers use high voltage corona discharge and should
not be used in or near flammable or explosive environments. In
no event will Desco or any seller be responsible or liable for any
injury, loss or damage, direct or consequential, arising out of the
use of or the inability to use the product. Before using, users
shall deter mine the suitability of the product for their intended use,
and users assume all risk and liability whatsoever in connection
therewith.
Figure 8. Audio On/Off and Alarm and Balance Adjustment
of High Output Overhead Ionizer.
Health
There are no known health risks associated with our
devices. The emitters work at about 4-6 kV and can create
ozone, but there have been no significant measurement
of ozone from our emitter sets, as all our existing units
test well below the OSHA limit of 0.05 ppm ozone. For
additional safety information, see “Dispelling an Old Myth”
written by William Metz of Hewlett-Packard published in
Evaluation Engineering magazine, September 2001.
Limited
DESCO WEST
- 3651 Walnut Avenue, Chino, CA 91710 • (909) 627-8178
DESCO EAST
- One Colgate Way, Canton, MA 02021-1407 • (781) 821-8370 • Website: