Distributor of Desco: Excellent Integrated System Limited
Datasheet of 60480 - EMITTER BOARD O'HD IONIZER PAIR
Contact us: [email protected] Website: www.integrated-circuit.com
TROUBLESHOOTING CHART
Limited Warranty
Desco expressly warrants that for a period of five (5) years from the date of purchase Desco CE Ionizers will be free of defects in material (parts) and
workmanship (labor). Within the warranty period, a credit for purchase of replacement Desco CE Ionizers, or, at Desco's option, the CE Ionizer will be repaired
or replaced free of charge. If product credit is issued, the amount will be calculated by multiplying the unused portion of the expected five year life times the
original unit purchase price. Call Customer Service at 909-627-8178 (Chino, CA) or 781-821-8370 (Canton, MA) for Return Material Authorization (RMA) and
proper shipping instructions and address. Any unit under warranty should be shipped prepaid to the Desco factory. Include a copy of your original packing slip,
invoice, or other proof of date of purchase. Warranty replacements will take approximately two weeks.
If your unit is out of warranty, Desco will quote repair charges necessary to bring your unit up to factory standards. Ship your unit freight prepaid and call
Customer Service at 909-627-8178 (Chino, CA) or 781-821-8370 (Canton, MA) for proper shipping instructions and address.
Warranty Exclusions
THE FOREGOING EXPRESS WARRANTY IS MADE IN LIEU OF ALL OTHER PRODUCT WARRANTIES, EXPRESSED AND IMPLIED, INCLUDING
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH ARE SPECIFICALLY DISCLAIMED. The express warranty will not apply to
defects or damage due to accidents, neglect, misuse, alterations, operator error, or failure to properly maintain, clean or repair products.
Limit of Liability
Electronic ionizers use high voltage corona discharge and should not be used in or near flammable or explosive environments. In no event will Desco or any
seller be responsible or liable for any injury, loss or damage, direct or consequential, arising out of the use of or the inability to use the product. Before using,
users shall determine the suitability of the product for their intended use, and users assume all risk and liability whatsoever in connection therewith.
Turn key to "SET" or "LOCK"
position.
One or more emitter cassettes are
Push in emitter cassette(s)
not fully inserted.
completely.
No Power
Check power cord or fuse.
Key is in "Lock " Position
(Blue indicator On).
Button depressed too quickly,
or pressed too lightly.
"PWR" light is
Emitter pins are dirty or
Remove emitter cassette
flashing red.
contaminated.
and clean emitters.
"PWR" light is
flashing after emitter
Refer to page 6 and 7 for
cassettes have been
calibration instructions.
cleaned.
There is no audible
alarm when "PWR"
light is flashing red.
PROBLEM
POSSIBLE CAUSE
SOLUTION
Unit won't turn on
Fan speed or
Balance won't
adjust
Unit is out of calibration.
Alarm switch is set to off.
Refer to page 5 and 6
for switch location.
TB-2087
Page 8 of 8
© 2002 DESCO INDUSTRIES INC.
Employee Owned
Key is on "OFF" position.
Turn key to "Set" Position.
Push and hold buttons firmly.
DESCO WEST
- 3651 Walnut Avenue, Chino, CA 91710 • (909) 627-8178 • Fax (909) 627-7449
DESCO EAST
- 90 Hudson Road, Canton, MA 02021 • (781) 821-8370 • Fax (781) 575-0172 • Web Site: http://www.desco.com
9 / 9
9 / 9
