www.desatech.com
108795-01V
16
INstallatIoN
Continued
LOG PLACEMENT FOR M42, M42P,
VM42 AND VM42P MODELS
1. Place large back log (log 1) onto grate
making sure notches rest over grate (see
Figure 29).
2. Insert lower end of log 2A between first
two grate fingers and position upper end
into notch on front of log 1. See Figure 29.
Place log 2B on front right side of grate as
shown in Figure 29.
3. Place log 3 into notch on top left of log 1,
resting lower end on left two grate fingers
(see Figure 30).
4. Place upper end of log 4 into notch on log
1 as shown in Figure 30. Rest lower end
of log 4 on middle grate finger as shown
in Figure 31.
5. Place upper end of log 5 into notch on top
inner right of log 1 (see Figure 31). Rest
lower end of log 5 on middle grate finger
as shown in Figure 32.
6. Place log 6 into notch on top right of log
1 (see Figure 31). Rest lower end of log
6 on top of log 2B (see Figure 32).
As an option to enhance the look of the hearth,
you may place the lava rock provided around
front and sides of burner pan.
NOTICE: Do not put lava rock
inside the burner pan or around
the air mixer fitting. Placing lava
rock inside the burner pan or
blocking the openings of the pro
-
pane/LP air-mixer could cause
performance problems.
Figure 29 - Installing Logs 1, 2A and 2B
Log 2A
Log 2B
Log 1
Notch
Figure 30 - Installing Logs 3 and 4
Log 4
Log 3
Log 1
Notches
Figure 31 - Installing Logs 5 and 6
Figure 32 - Logs Installed for M42, M42P,
VM42 and VM42P Models
Log 6
Log 5
Notch
Log 1
Log 2B
