![background image](http://html1.mh-extra.com/html/desa/sbvbn/sbvbn_owners-operation-and-installation-manual_2486510004.webp)
106828-01C
For more information, visit www.desatech.com
For more information, visit www.desatech.com
4
LOCATION AND SPACE REQUIREMENTS
Determine the safest and most efficient location for your DESA B-vent
cast iron stove. Make sure that rafters and wall studs are not in the way
of the venting system. Choose a location where the heat output is not
affected by drafts, air conditioning ducts, windows, or doors. Figure 2
shows some common locations. Read all venting information in this
manual. Be aware of all restrictions and precautions before deciding the
exact location for your stove.
PRE-INSTALLATION
PREPARATION
6
"
4
"
Front
4"
36"
from
Front
42"
Ceiling
Floor
from
Back
Wall
29"
Figure 3 - Clearances for Standard Installation
On Wall with Vertical
Termination Through Ceiling
Corner Installation with Vertical
Termination Through Ceiling
Figure 2 - Common Stove Locations
WARNING: A qualified installer or service person
must install stove and burner system. Follow all local
codes.
CAUTION: This stove with burner system creates
warm air currents. These currents move heat to wall
surfaces next to stove. Installing stove next to vinyl
or cloth wall coverings or operating stove with burner
system where impurities (such as, but not limited to,
tobacco smoke, aromatic candles, cleaning fluids, oil
or kerosene lamps, etc.) in the air exist, may discolor
walls or cause odors.
Install and use stove and burner system with care. Follow all local
codes. In the absence to local codes, use the current National Fuel
Gas Code ANSI Z223.1/NFPA 54* (USA) or the current CAN/CGA-
B149[.1 or .2] Installation Codes (Canada).
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
LOCAL CODES
PRODUCT FEATURES
OPERATION
This B-vent cast iron stove with burner system is clean burning and
vents vertically. Heat is generated by both realistic flames and
glowing embers. When used without the blower accessory, the
stove with burner system requires no electricity making it ideal for
emergency backup heat.
PIEZO IGNITOR
This burner system has a piezo ignitor. This system requires no
matches, batteries, or other sources to light burner system.
When deciding the location of your stove, follow these rules:
1.
Do not connect this stove and burner system to a chimney flue
serving a separate solid-fuel burning fireplace or appliance.
2.
Due to high temperatures, do not locate this stove in high traf-
fic areas or near furniture or draperies.
3.
Proper clearances must be maintained, see Figure 3 below and
Figure 4 on page 5.
4.
This stove is a freestanding unit designed to set directly on the
floor. If your stove is to be installed directly on carpeting, vi-
nyl tile, or any combustible material other than wood, it must
be installed on a metal or wood panel extending the full width
and depth of the stove. See Figure 5, page 5.
LOCAL CODES
PRODUCT FEATURES
Operation
Piezo Ignitor
PRE-INSTALLATION PREPARATION
Location and Space Requirements