www.desatech.com
119421-01E
16
INSTALLATION
Continued
Figure 19 - Installing Middle Log #2
Figure 20 - Installing Back Log #3
Middle
Log (#2)
Tab
Burner
U-Shaped
Slot
Hole in
Grate Base
Pins
Burner
Back
Log (#3)
Figure 18 - Installing Front Log #1
Front
Log (#1)
Grate
Fingers
Grate
Base
3. Locate pins on bottom of back log (#3).
Slide these pins into holes in grate base
behind burner (see Figure 20).
4. Locate holes on bottom of right crossover
log (#4). Slide holes onto right pin on
middle log (#2) and right pin on back log
(#3). See Figure 21 for placement.
5. Locate holes on bottom of middle cross-
over log (#5). Slide holes over middle pin
on middle log (#2) and left pin on back log
(#3). See Figure 21.
6. Locate holes on bottom of left crossover
log (#6). Slide these holes onto left pins
located on middle log (#2) and front log
(#1). See Figure 21.
7. Add lava rock around base of heater if
desired. Do not place any lava rock on
logs or burner.
Figure 21 - Installing Crossover Logs
