manualshive.com logo in svg
background image

Save this manual for future reference.

VENT-FREE INFRARED NATURAL GAS HEATER

OWNER’S OPERATION AND INSTALLATION MANUAL

Models: CGN18RA and CGN30D

WARNING: If the information in this manual is not followed exactly, a fire or
explosion may result causing property damage, personal injury, or loss of life.

— Do not store or use gasoline or other flammable vapors and liquids in the

vicinity of this or any other appliance.

— WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in your building.
• Immediately call your gas supplier from a neighbor’s phone. Follow the

gas supplier’s instructions.

• If you cannot reach your gas supplier, call the fire department.

— Installation and service must be performed by a qualified installer, service

agency, or the gas supplier.

®

This appliance may be installed in an aftermarket* manufactured (mobile) home,
where not prohibited by state or local codes.

*Aftermarket: Completion of sale, not for purpose of resale, from the manufacturer

This appliance is only for use with the type of gas indicated on the rating plate.
This appliance is not convertible for use with other gases.

Содержание Comfort Glow CGN18RA

































Отзывы: