www.desatech.com
123779-01C
6
WARNING: Always have
screen in place before operating
fireplace. This prevents exces
-
sive temperatures on fireplace
surfaces.
WARNING: Failure to position
the parts in accordance with
these diagrams or failure to use
only parts specifically approved
with this fireplace may result in
property damage or personal
injury.
ASSEMbLING FIREPLACE
Tools Required:
• Phillips screwdriver
• 5/16" hex wrench
• slotted screwdriver
• scissors
1. Remove two screws that hold fireplace
screen in place for shipping. These
screws are located near top of screen.
Discard screws. Lift fireplace screen up
and pull out to remove (see Figure 2). Set
screen aside until installation has been
completed.
Screen
Shoulder
Screw
Figure 2 - Removing and Replacing
Screen (Mantel Not Shown)
ASSEmBLy
2. Remove all packaging from inside of
unit.
3. Remove bubble wrap from logs and dis-
card.
4. Check installation of brick liners. Brick
liners are in 4 pieces: 2 sides, 1 back and
1 top.
