background image

115425-01

3

3

For  more information, visit www.desatech.com

SAFETY INFORMATION

PRODUCT IDENTIFICATION

LOCAL CODES

UNPACKING

PRODUCT IDENTIFICATION

Figure 1 - Product Identifi cation (Ramp Pan Burner)

Hearth Kit Model _________________________

Serial Number ___________________________

Log Set Model ___________________________

SAFETY INFORMATION

Continued

Grate

Burner 

Pan

Burner Inlet 
(Under Pan)

UNPACKING

 CAUTION: Do not remove the data plates from 

the burner pan. The data plates contain important 
product information.

1. 

Remove logs, hearth kit, pan materials, and hardware from car-
ton.

2.  Remove all protective packaging applied to logs and base for 

shipment.

3.  Check all items for any shipping damage. If damaged, promptly 

inform dealer where you bought the product.

LOCAL CODES

Install and use log set with care. Follow all local codes. In the 
absence of local codes, use the latest edition of The National Fuel 
Gas Code ANSI Z223.1/NFPA 54*.

*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

10. The installation and provisions for combustion and ventilation air 

must conform with the 

National Fuel Gas Code, ANSI Z233.1/

NFPA 54, Section 5.3, Air for Combustion and Ventilation

.

11

.  Do not run log set

• where fl ammable liquids or vapors are used or stored
•  under dusty conditions

12. Do not burn solid fuel in the fi replace after installing the log set. Do 

not use this log set to cook food or burn paper or other objects.

13. Log set becomes very hot when in use. Keep children and adults 

away from hot surface to avoid burns or clothing ignition. Log 
set will remain hot for a time after shutdown. Allow surface to 
cool before touching.

14.  Carefully supervise young children when they are in the room 

with log set. 

15.  To help prevent breakage, new logs must be broken-in (see 

Curing Logs page 10).

16. Turn log set off and let cool before servicing, installing, or re-

pairing. Only a qualifi ed service person should install, service, 
or repair log set. 

17.  Provide adequate clearances around air openings.

Содержание BCS18, BCS24, BCS30

















Отзывы: