background image

WARRANTY AND REPAIR SERVICE

WARRANTY SERVICE

Should your heater require service, return it to your
nearest authorized service center. Proof of purchase must
be presented with the heater. The heater will be inspected.
A defect may be caused by faulty materials or workman-
ship. If so, DESA International will repair or replace the
heater without charge.

REPAIR SERVICE

Return the heater to your nearest authorized service
center. Repairs not covered by the warranty will be billed
at standard prices.

Illustrated parts lists can be obtained free of charge. Send
a self addressed stamped envelope to the address listed
below. List the heater model number and the date located
in the lower right corner of this page. A service manual
may be purchased from the address listed below. Send a
check for $5.00 payable to DESA International.

When writing for information regarding your heater, be sure
to include the model number and serial number as shown on
the model plate.

Each Service Center is independently owned and operated.
We reserve the right to amend these specifications at any
time without notice.

DESA

INTERNATIONAL

Corporate Headquarters
2701 Industrial Drive
P.O. Box 90004
Bowling Green, KY 42102-9004

For information, write: DESA International, P.O. Box 90004

Bowling Green, Kentucky 42102-9004 ATTN: Customer Service Department

When writing, always include model number and serial number.

LIMITED WARRANTY

DESA International warrants this product and any
parts thereof, to be free from defects in materials and
workmanship for six (6) months from the date of first
purchase when operated and maintained in accordance
with instructions. This warranty is extended only to the
original retail purchaser, when proof of purchase is
provided.

This warranty covers only the cost of parts and labor
required to restore the product to proper operating
condition. Transportation and incidental costs associ-
ated with warranty repairs are not reimbursable under
this warranty.

Warranty service is available only through authorized
dealers and service centers.

This warranty does not cover defects resulting from
misuse, abuse, negligence, accidents, lack of proper
maintenance, normal wear, alteration, modification,
tampering, contaminated fuels, repair using improper
parts, or repair by anyone other than an authorized
dealer or service center. Routine maintenance is the
responsibility of the owner.

THIS EXPRESS WARRANTY IS GIVEN IN LIEU
OF ANY OTHER WARRANTY EITHER EX-
PRESSED OR IMPLIED, INCLUDING WARRAN-
TIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.

DESA International assumes no responsibility for in-
direct, incidental or consequential damages. Some
states do not allow the exclusion or limitation of
incidental or consequential damages or limitations or
exclusions may not apply to you. This Limited War-
ranty gives you specific legal rights and you may also
have other rights which vary from state to state.

Model No.

Serial No.

Date of Purchase

(To be filled in by purchaser)

KEEP THIS WARRANTY

102553-01
Rev. B
11/95

Содержание ARL B50H

















Отзывы: