User Instruction Manual V1.01 (Rev.998 2010)
47
Performing a Reset function
The following section describes how to reset the Dermaray Laser. There are two
reset methods; a software reset and hardware reset. The software reset will clear all
user memory; all entered and stored information will be lost and unrecoverable. In
most instances a hardware reset is adequate, on rare occasions if Dermaray Laser
becomes jammed or locked, or after a software upgrade a hardware reset may
need to be performed. A hardware reset will not erase any stored information in the
Dermaray Laser.
WARNING:
Performing a software reset will erase all entered and stored
information. Dermaray Laser will need to be reconfigured in the same manner as a
new device. This includes all patient information, bulb life timers, treatment
information, date and time.
Software reset
1. WAKE Dermaray Laser, access the System Tools Menu, and select
Default Reset.
2. When prompted with Reset Config, select YES.
3. All software information is now reset and any stored information is lost.
Hardware reset
WARNING:
After hardware reset Dermaray
Laser will briefly flash its laser modules,
ensure the device is face down and not directed at your eyes. Wear appropriate eye
protection.
Hardware reset button. Once pressed, the LCD display will flash and beep.
1. WAKE Dermaray - Laser.
2. Insert a straightened paper clip or other similar blunt thin object
approximately 5mm.
Hardware reset button
