Shenzhen Dericam Technology Co.,LTD
H501W User Manual
www.dericam.net
Copyright @ Shenzhen Dericam Technology Co., Limited
12
1---Frequency
1) 50HZ ---------Indoor surveillance (Region: Europe, China)
2) 60HZ ---------Indoor surveillance (Region: USA, Canada)
There are two options within the menu of Frequency, 50HZ, 60HZ. It depends on the frequency of the electricity.
2----High Definition Parameter
You can specify stream, normally, high bit rate, higher image quality. But the frame rate need to setting according to
the bandwidth, when bandwidth is narrow, if set high frame rate, the result will be worse.
You can set Max frame rate, when the bandwidth is limited, suggest set to lower frame rate. Normally, above 15fps
the stream is smoothly.
3----Standard Definition Parameter
You can set higher frame rate if you are suing standard lower resolution.
4----OSD Time, Device name
Here you can set OSD information of the camera. Or you can change the camera name which displayed on the
surveillance windows.
5.4 Display Settings
Fig5.4
Display Settings
Brightness
Default parameter is 5.You can adjust the brightness of the image by select different value.
Saturation
Default Saturation is 3. You can adjust the Saturation by select difference value.
Contrast
Default Contrast is 0. You can adjust the Contract by select difference value.
Flip/Mirror
You can flip the image by enabling Flip button, or mirror the image by enabling Mirror button.
Night Vision Mode/ IR LED Switch control
You can set Night vision mode as auto or Manual. If you want to make the IR LED off, you have to set manual,
status off.
