Edition:03/21_public
9
Manual Storage Heater
Output Control
A proportion of the stored heat will be radiated from the casing providing a low level of
background heat. Output can be increased by switching on the fan(s) whereby heat is
discharged from the low-level outlet grille.
This is done at the room thermostat located on the control panel. If the thermostat is provided
with an "ON-OFF" switch for the fan(s) set this switch to "ON". Then turn the thermostat knob
to the desired room temperature indicated on the dial. Once set, the thermostat will then
keep the room temperature automatically at this level by switching the fan(s) on and off
accordingly.
Care of the Storage Heater
TTS storage heaters are designed to require minimum maintenance. The surface (when
cool) can be cleaned with any "liquid" household cleaner.
Note - Do not use abrasive cleaners as these may damage the finish.
In those areas where considerable amounts of dust, dirt and/or fur are encountered, it is
recommended that the area behind and in front of the heater be vacuumed quite frequently.
The fan assembly and base compartment should be completely cleaned at least every three
years just before a heating season.
Electrical Shock Hazard
Technotherm storage heaters are supplied by more than one electrical circuit.
Be sure that all circuits are turned off before opening the heater case.
Service should only be made by competent, qualified personnel.
