Derby TTN 40 Скачать руководство пользователя

Страница: 20 / 20

Edition:03/21_public

Manual Storage Heater Technotherm

Additional Information

Operation without auxiliary heating

Switch on the switch.

Turn the integrated room temperature control knob to the maximum position (clockwise stop)

until the room temperature has reached a comfortable level. Then turn the controller knob

slowly to the left until the controller switches off (audible "click"). The room temperature is

now automatically kept constant at this level and needs no further adjustment.

Operation with auxiliary heating (

not for Australia

)

If the unit is to be operated with auxiliary heating, the switch for the auxiliary heating must be

set to position "I" and the switch for the fan must be set to position.

If heat is still required after the unit has been unloaded, the auxiliary heating switches on

automatically and continues to heat the room. The operation of the auxiliary heating is

indicated by the control lamp. If the room is not to be heated, the room thermostat is switched

off via the fan switch. The setting on the room temperature controller is left as it is.

Energy-saving tip

A higher electricity price usually has to be paid for operation with supplementary heating.

The auxiliary heating should therefore only be switched on when needed. Pay attention to the

position of the switch "I - 0", as the control lamp only lights up during heating operation. At

night, during prolonged ventilation and when the rooms are not in use, we recommend

switching off the discharge fans. This can be done advantageously by installing a central switch

or via a time switch. The setting on the units can then be left as it is. We reserve the right to

make technical changes.

Always interrupt all electrical circuits before undertaking any work in the electrical

compartment.

HEAD OFFICE

Phone (02) 9605 5119 (02) 9618 3842

9/3 Lancaster St Ingleburn NSW 2565 P.O. Box 568 Ingleburn NSW 1890 E:

[email protected] W: www.derby-heatbanks.com.au

NSW/ACT/QLD/VIC

D.R. Distribution

9/3 Lancaster St

Ingleburn NSW 2565

Ph: (02) 9605 5119

E: [email protected]

TAS

Electrical Agencies

4 Linear Court

Derwent Park TAS 7009

Ph: 03 6273 1855

E: [email protected]

SA/WA

Derby Heatbanks

P.O. Box 901

Blackwood SA 5051

Ph: 0419 804 946

E: [email protected]

Содержание TTN 40





















Результаты поиска

Содержание TTN 40

Отзывы:

Похожие инструкции для TTN 40

Бренды по названию

Популярные бренды

Derby TTN 40, Инструкция по установке и техническое руководство

Результаты поиска

Содержание TTN 40

Отзывы:

Похожие инструкции для TTN 40

Бренды по названию

Популярные бренды