Derbi Dirtboy 10, Руководство по ремонту

Страница: 27 / 48

27
R
EMOVING THE PISTON
- Fit the piston and the piston pin to the connecting rod. The
arrow on the piston must face the exhaust side.
- Insert the piston pin circlip into the specially designed tool.
- With the gap in the position shown on the tool, fit the circlip
into the tool by means of the drift.
- Rest the tool on the piston taking care that the side with the
90° bevel always faces upwards as shown in the figure.
- Fit the piston pin circlip using the tommy.
CAUTION
USING A HAMMER TO FIT THE CIRCLIPS CAN DAMAGE THE
CIRCLIP SEATS.
Specific tooling
0204484YIIK Piston pin circlip fitting tool
ENGINE EE
- CYLINDER ASSY. AND TIMING SYSTEM
ENGINE
- CYLINDER ASSY. AND TIMING SYSTEM
R
EMOVING THE PISTON