Page 24 of 47
4.2
Operating cycle
Ensure that the power cord is intact and in perfect state.
Warning!
Before inserting the plug, ensure that the voltage of the power supply line
corresponds to the one indicated on the vacuum's identification plate.
-
Make sure the plug is correctly inserted into the socket
-
Make sure the hose is properly inserted and locked in the suction inlet.
-
Make sure the bin or the Longopac® sac are located and blocked under the filtering chamber of
the vacuum cleaner
-
Secure the vacuum cleaner using the lever on the swivel caster, as shown in the figure.
Warning!
Do not move the vacuum cleaner while it’s working
-
Hold the end of the hose with the chosen vacuum accessory.
-
Activate the motor with the first switch (
2
) and start vacuuming
-
For greater suction power activate the second motor with the second switch (
3
) and the third motor
with the third switch (
4
)
-
To turn the vacuum off the previously activated motors must be deactivated
-
Once operations are over, disconnect the vacuum cleaner from the socket
Содержание M 100
Страница 1: ...INSTRUCTION AND MAINTENANCE MANUAL M SERIES...
Страница 45: ......
Страница 46: ......