Deprag 420988 D, Руководство по эксплуатации

Страница: 8 / 24

8
6 Assembly Instructions
WARNING
Potential loss of life due to electric shock!
Before working on the tool (e.g. assembly, installation and maintenance)
disconnect the electric equipment from power supply (switch off main switch
and pull out main plug).
6.1. Installation Instructions
When installing the EC-Screwdriver Spindle the following points have to be observed:

Install the EC-Screwdriver Spindle according to the Dimension Sheet .

The EC-Screwdriver Spindle may be installed in any orientation.

Use only mounting brackets having a sufficient size (

Dimension Sheet ).

Use only the mounting elements delivered to mount the EC-Screwdriver Spindle.

Level the EC-Screwdriver Spindle and the screwdriving position so that there are no or
only low radial forces (e.g. by dead load).
Support plates are not included in delivery of the EC-Screwdriver Spindle.
Make sure to choose a suitable material (e.g. steel with tensile strength
Rm

370 N/m²) for support plates.
Make sure not to exceed the max. driver stroke (

Dimension Sheet ) dur-
ing screwdriving.