Deprag 397075 A, Руководство по эксплуатации

Страница: 16 / 40

16
4.4. Connection-Possibilities of the Function Control
·
Use as air pressure outlet during screw-assembly:
-
to control driver start and stop, as well as shut-off control of clutch;
-
as cycle counter of the complete process;
each in connection with a PE- Switch or similar.
·
Use as air pressure inlet:
-
if 6,3 bar (90 PSI) air pressure is given to the function control port,
the driver starts rotating at about 15 % of its speed. This will
simplify the engagement of bit/socket to fastener (for example
when driving hex screws, nuts, etc.)
Function Description / Driver Start
Picture: Installation
The screwdriver starts as soon as connected to the air supply.