Deprag 347-228-31L, Руководство по эксплуатации

Страница: 4 / 36

4
1.2. General Safety Tips for Pneumatic Stationary Screwdriver Spin-
dles
•
Disconnect the tool from the air supply, when changing bits or
when re-adjusting clutch.
•
Do not wear wide clothing or jewelry, for they can be seized by
movable parts. Wear a hairnet if operator has long hair.
•
Keep hands off the installed Screwdriver Spindle.
•
Injury is possible, if the driver reacts with an unexpected motion or when
used with broken bit or fixture.
•
When using tool with bit-adapter or bit-extension (i.e. Magnetic Bitholder)
make sure, that those items are in good condition and well suited for the
application with this tool.
•
Do not exceed the maximum allowable air pressure. A pressure
regulator has to be installed, which regulates pressure before
reaching the tool.
•
After turning-off the tool, the bit will continue to rotate (inertia).
1.3. Owner Obligation
The owner is obliged to only let persons operate the equipment, who
•
are familiar with basic work environment safety rules and accident-
preventing regulations. Also, those persons must have been instructed in
the correct use of the equipment.
•
have read and understood all safety and warning notifications in the
Operating Instruction Booklet, as well as all other documentation
pertaining to this equipment.
•
check and confirm at regular intervals, that a safety oriented operation is
guaranteed.
Only qualified and authorized personnel is allowed to operate, maintain and
repair this equipment. A malfunction, which impairs operator safety, must be
immediately removed.