Depaepe Telecom Securphone IP, Руководство пользователя

Страница: 33 / 43

SecurPhone IP – User Guide
33
Settings via web interface: (the reset operation modifies these settings)
Setting Factory setting
Account
Basic SIP Transport UDP
DNS A Record
SIP Registration Yes
Unregister on reboot No
Register expiration 15 min
Outgoing call without registration Yes
Local SIP Port for FXS : 5060
for FXO : 5062
RFC 2543 Hold Yes
Account
Codec
PTime 20 ms
G.723 encoding Rate 6,3 kbps
iLBC mode 20 ms
iLBC Payload Type 97
Account
Advanced
Enable Call Feature No
Use NAT IP address blank
VAD No
Symetric RTP No
Subscribe for MWI No
Anonymous Call Rejection No
Session Expiration 180 sec
Min-SE 90 sec
Network
Basic
DHCP/Static IP DHCP
Reply to ICMP Yes
Network
Advanced
QoS Set - Layer x Layer 3 : 184
Layer 2 : blank
Web Server - HTTP Port 80
Setting
Preference Web language English
No key entry timeout 4 sec
Setting
Tones Select country Custom
Dial tone, Ringback tone, Busy tone, Call
waiting tone,…
Custom
Management Password Admin : admin
User : 1234
Management
Auto provision
Firmware Server Path address_ip_server_provider/fm
Config Server Path address_ip_server_provider/cfg
Management
Configuration
Syslog Level None
4.4. Phone settings via Web interface
The SecurPhone IP comes out of factory in DHCP mode, the IP address is automatically
renewed.
To find IP address, according to the model with its internal or external keypad:
- Pick up the handset and dial ***
- dial 02
- listen and note IP address.
You can also use a tool like ‘Wireshark’ to find IP address, then enter this address into
the address bar of your internet browser (ex
http://192.168.0.1 with default password :
admin).
Your computer has to be on the same network segment that your phone in order to
access to the setting page. Contact your network administrator if you have any doubt.
- Network setting :