32
Pre-dialing
The unit has pre-dialing function, when you may enter and edit the number before dial it out.
The following procedure describes how to use this function
:
1. In idle mode, enter the number you want to dial. During entering, you can press
R/CLR
key to correct the
number.
2. Press
key or
key once, the unit will dial out the number show on the LCD.
Redial function
1. Press
key or
key.
2. Press
RD/P
key, the last dialed number will be dialed again.
To Lock/Unlock the keypad
To lock the keypad
Press and hold the
key for about 2 seconds.
You will hear a beep tone, the icon
will appear on the top of display, “HS LOCKED” will appear on LCD.
While the keypad is locked, any key you press is invalid.
To unlock the keypad
Press and hold the
key for about 2 seconds.
You will hear a beep tone, the icon
will disappear from the display and it will go back to idle mode.
MULTI-HANDSET OPERATION
Maximum 5 handsets can be linked to the same base unit. Maximum 4 bases can be linked to the same
handset.
If you have more than one handset registered with one base, there are some advanced functions, operation it
by the follow ways:
Intercom
The intercom feature is activated by pressing the
INT
key.
1. In idle mode, press
INT
key once.
2. The user will be prompted to select the number of the internal handset with which you wish to connect,
press the registered sequence number of the handset you want to call
3. The destination handset will ring, press
or
key to enter conversation mode. To end intercom
mode, any handset press
key.
Call transfer
During a call, it’s to transfer the call to another handset.
1. During a phone call, press
INT
key once, you will be prompted to select the number of the internal
handset with which they wish to connect, press the registered sequence number of the handset you want
to call
2. The destination handset will ring. With the melody defined for an internal call.
3. Press
or
key of the ringing handset to accept the call.
4. The two internal handsets will be connected. To complete the transfer of the call, the initiating handset
should be placed on the cradle and the external call will now be connected to the second handset.
Three-way conference call
1. When a call comes, Press
or
Содержание Process
Страница 22: ...22...