Denyo DN-C-50-4-06, Инструкция по эксплуатации

Страница: 12 / 30

2
‐
4 Installation
２‐４‐
1
Cautions for installation location
①
Use the eye bolt on the top of the body of the welding machine when suspending the machine.
②
Do not install the welding machine in a dusty place or a place where temperature and humidity are always
high.
③
Be sure to remove the frame for transport, and firmly secure the welding machine onto
a solid floor by anchor bolts to prevent vibration during weld operation
④
Install the welding machine as close to the transformer of the power equipment as possible.
⑤
The power equipment must comply with Section 2-4-5 (Required equipment table).
２‐４‐２
Piping and connection methods
①
Connect earth terminal on welding machine back surface.
Use a cable of 1
４
mm
2
or more.
②
Connect a durable rubber air hose to the "air inlet."
Use a hose that matches the hose port (10.5 in diameter). (0.7 MPa)
③
Connect water hoses to the "cooling water inlet and outlet."
For the inlet, use a hose that matches the hose port (10.5 in diameter).
For the outlet, use a hose that matches the hose port (14 in diameter).
④
Connect the foot switch to the " foot switch" metal receptacle.
⑤
Connect the power cable to the cable on the back of the body of the welding machine.
The cable must be equal to the specified diameter or more.
(12)