[N o te]
This machine is designed for the operation at a level solid foundation or ground. To avoid
a trouble, do not operate this machine in the other conditions.
Installation procedure
* Install the machine horizontally on a solid foundation.
* Provide a space of more than about lm at the side of the control panel and fuel feed port
to ensure correct operation and supply.
* Provide a space of more than about 1.2m on the left and right sides for check of the
engine, oil supply and cable connection work.
* A sufficient space is required at the top of the machine to allow hot air (exhaust air) from
the radiator and exhaust gases to be discharged and to supply water to the radiator.
* When the machine is operated in a place with much dust or salt, careful maintenance is
required to prevent clogging or damage to the radiator or poor insulation of electric parts.
Indoor installation
* Exhaust gases should be discharged outdoors using an exhaust pipe.
* Exhaust air should also be discharged outdoors using a duct or the like.
* Insufficient indoor ventilation will raise the (indoor) temperature and
affects the performance of the machine.
* For details of required volume of ventilation, contact distributor or our office.
- 2 5
-
