Functional Parts( TV )
8
To turn the TV power ON
Put the TV set on the correct place, then connect the DC plug of the AC-DC adaptor to the DC 12V socket
at the back of the TV set. Connect the adaptor main cord to the wall outlet ,then the LED indicator lamp
turns red/green and the TV set is at Standby/work Mode. At Standby Mode, if Standby Button is pressed
the power indicator will change to green. It takes a few seconds before the picture appears.
To turn the TV power OFF
Press the Standby Button to make the TV set in Standby Mode, then disconnect the power plug from the
wall outlet.
Front View of LCD Set
NOTE
If TV is the selected input without
signal received and NO operation
is performed for about 5 minutes
continuously, the TV set will enter
standby mode. For any inputs other
than TV, the TV set will not enter
standby mode automatically without
users instruction. If you are not
going to use this TV set for a long
time, switch off the set and
disconnect the power plug from
the wall outlet.
2. Remote Sensor
1. LED indicator lamp
3. Standby Button
4. SOURCE Button
5. MENU Button
6. P+ Button
7. P- Button
8. V+Button
9. V- Button
1
2
Once you insert the disk to DVDslot, the player will suck it in, and the current source will be switched
to DVD status automatically.
Notes:
1.Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.
2.Do not use irregularly shaped CDs (e.g., Heartshaped or octagonal)since they may result in
malfunctions.
3.Some playback operations of DVDs and Video CDs may be intentionally programmed by software
manufacturers. This unit plays DVDS and Video CDs according to disc content designed by the
software manufacturer, therefore some playback features may not be available or other functions
may be added.
1. DVD Slot
1
9
8
7
6
5
4
3
V-
V+
P-
P+
MENU
STANDBY
SOURCE
