-5-
-6-
Radio
reception
1
.
Press
FUNCTION
button select
RADIO mode
.
2.Tune to required station by
BACK/TUNE DN or NEXT/ TUNE UP.
Manual Tuning
:
BACK or
NEXT and then release within 1 sec.
Auto Tuning
: Press the play/pause button enter the automatic channel
scan mode, and to be put automatically sets.
Preset Channel:(
FM 30 Preset memories
)
(1)
BACK or NEXT button Select desired station.
(2) Press PROGRAM button once , The MEMORY number indicator begins steady in the display.
(3) Press PRESET-UP or PRESET DOWN buttons to select the desired number.
(4) Press PROGRAM button to save that station.
(5) Repeat steps (1) to (4) procedures for other stations.
3.After end of program. Press PRE-UP or PRE-DN to start play the frequency that you selected.
4.
[VOL-]or [VOL +] to adjust the volume.
5.Extend TELESCOPIC ANTENNA to its full length if you are listening to FM broadcasting.
6.Turn off the radio by press FUNCTION button select other mode or press power button to off the unit.
7.Switch
on
again
after
shut
down
,
the
memory
frequency
still
exists
.
rotate
Rotate
Rotate
Rotate
USE
RADIO
、
、
.
To listen music with a mp3 discman walkman
1
.
Connect
to
the
AUX
.
2
.
press
function
selector
to
AUX
,
the
sound
source
of
the
mp3
or
discman
or
walkman
will
output
from
the
unit
.
-
the
volume
control
to
adjust
the
volume
.
-The
unit
can
'
t
control
the
player
.
Rotate
USE
AUX
USING THE CASSETTE
UNDERSTANDING THE BUTTONS
PLAY
- Press to play cassettes.
REW
- From stop mode, press to rewind the tape toward the beginning.
F.FWD
- From stop mode, press to advance the tape toward the end.
STOP/EJ
. - Press to stop current tape activity or to open the cassette compartment door when
no buttons are active.
PAUSE
- Press to interrupt tape play or record mode, press the second time to resume tape play
or tape record mode.
PLAY A CASSETTE TAPE
1.Press FUNC button select TAPE mode.
2.Press STOP/EJ.key to open the cassette compartment door.
3.Insert a recorded cassette and close the cassette compartment door.
4.Press PLAY to start playback.
5.To interrupt playback, press PAUSE ,To resume, press the key again.
6.Press REW/F.FWD to move tape to the desired starting point.
7.Adjust the volume to your desired listening level.
8.To stop the tape ,press STOP/EJ.
- The keys are automatically released at the end of the tape, except if PAUSE has been activated.
PROGRAM METHOD
(1)Press the [PROGRAM] key at STOP mode, system will go to PROGRAM mode.
-The PRG icon and P01 will blink at 2Hz. This prompts the user to enter the first songs in the
program PLAY list.
(2)The user can select the desire tracks by using [NEXT], [BACK]
keys.
Once these keys are pressed, the Display will show the selected track.
(3)After select the desired track, press [PROGRAM] key again and it will be stored in the memory.
MP3
Maximum 99 and CD Maximum 20 tracks can be programmed
when
Repeat
steps (2) to (3) procedures.
(4)If press the [STOP] key during the program mode, then the selected TRACKS will be
stored
in the memory and return to STOP mode (Continuous Play mode)
(5)If press the [PLAY] key during the program mode, it will start the program PLAY mode.
PLAY start from P01 Track
Erasing a program
You can erase the content of the memory by:
- While playing, press STOP button
twice
.
- Opening the CD door
- Select
the
other
mode
.