-2-
USING AC POWER
Battery Operation
The battery compartment is located on the back of the cabinet.
* Remove the battery compartment door by pressing downward on the tabs as shown in figure 1 below.
* Insert 8 C size (UM-2) batteries into the battery compartment as shown in figure 2 below. Be sure to
observe the polarity markings which are engraved inside the battery compartment. If the batteries are
inserted incorrectly, the unit
will not operated.
* Replace the battery compartment door.
NOTE: The AC power cord must be disconnected from the AC socket on the back of the unit in order
for the unit to operate on battery power.
,
,
Using AC Power
1.Connect the AC power cord into AC Socket and Standard household wall outlet. The batteries will be
automatically
disconnected. For dual voltage version. Make sure that the AC VOLTAGE SELECTOR is
switched to your local voltage.
2.Connect the power cord to the AC socket inlet and the wall outlet. the power supply is now
connected and ready for use.
3.To switch off completely, unplug the power cord from the wall outlet.
1.5V
1.5V
1.5V
1.5V
1.5V
1.5V
1.5V
1.5V
8 x R14 C CELL UM-2
Unplug the power cord from the wall outlet to protect your set during heavy thunderstorms.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
( OR BACK),NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO
RAIN OF MOISTURE.
This “bolt of lightning” indicates uninsulated materia within your unit
which may cause an electrical shock, for the safety or everyone in your
household, please do not remove product covering.
8 x R14 C CELL UM-2
CLASS 1
LASER PRODUCT
-1-