while the track number will blink continuously.
4.
To check the program you have stored after co
mpl
ete programming, press
the
PROGRAM BUTTON once
and all programmed tracks will be shown
one by one.
Note: While the PLAY/PROG. LED INDICATOR is flashing, never press
the CD STOP BUTTON otherwise all programmed memory will
be cancelled automatically.
5.
To cancel the P
rogrammed
play mode, simply open the CD DOOR or press
the CD STOP BUTTON
once during the CD “STOP” mode
.
STEREO HEADPHONE JACK
(phones/earphones not included)
For private listening, insert the plug of a stereo headphone into the STEREO
HEADPHONE JACK and adjust the VOLUME CONTROL KNOB accordingly.
During the use of a headphone, the Speakers are automatically disconnected.
RECORDING FROM CD PLAYER
1.
Slide the FUNCTION SWITCH to “CD” position.
2. Put a CD into the CD compartment with the label side upward.
3. Insert a cassette into the CASSETTE COMPARTMENT and press PAUSE
BUTTON of the cassette deck.
4.
Press RECORD BUTTON and PLAY BUTTON simultaneously for recording
stand-by. With the built-in ALC, the best recording quality is adjusted
automatically.
5.
Activate the CD player, playing in a desired TRACK as described in the
COMPACT DISC PLAYER OPERATION section. Release the PAUSE BUTTON
of the cassette deck to start recording.
6.
To stop recording temporarily, press the PAUSE BUTTON. To continue
recording, press the PAUSE BUTTON again.
7.
Press STOP/EJECT BUTTON of the cassette deck to stop recording. Then
stop CD playback by pressing the CD STOP BUTTON of the CD player.
MAINTENANCE
CLEANING THE TAPE HEADS
Clean the heads frequently to remove dust and tape residue. Dirt on the
heads will impair the sound quality of both recording and playback.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE APPLIANCE TO
RAIN OR MOISTURE. DO NOT REMOVE COVER. PILOT LAMPS SOLDERED IN
English - 6
