7. When the tape runs to its end, the cassette operation will be stopped
automatically.
CD OPERATION (CD-R/RW PLAYBACK COMPATIBLE)
Playing Compact Disc
Note
: Should skipping of tracks occur during CD playing, try turning the
volume down.
When CD is playing, do not open the CD Door.
1. Open the CD DOOR by pulling up the CD DOOR. Put a CD into the CD
COMPARTMENT and close the CD DOOR. Set the FUNCTION SWITCH to
“CD” position.
2. When the CD DOOR is closed with a disc inside, total number of tracks of
the disc will be shown on the CD LED DISPLAY and will go to “STOP”
mode.
3.
If the CD DOOR is not closed, the DISPLAY will show “
” and go to
“STOP” mode.
4.
If there is no disc inside, the DISPLAY will show “
n
o” and go to “STOP”
mode.
CD Display Indicators
Play/Pause Mode
1. When the PLAY/PAUSE BUTTON is pressed during “STOP” mode, the first
track will be played. The PLAY/PROG. LED INDICATOR will light up. The
CD LED DISPLAY will show the specific number of tracks being played.
2. For interruption while the CD is playing, press the CD PLAY/PAUSE
BUTTON once. The PLAY/PROG. LED INDICATOR will turn off while the
track number will flash continuously.
3. Though the sound stops, the disc will continue to spin. To re-start playing,
press the CD PLAY/PAUSE BUTTON once again. The music will start from
the exact position where it was interrupted.
English - 4
