background image

19 

WARNINGS 

Please read the manual completely and the instructions below before using the product. 

 

Product names: SEL-65110  
Product type: Electric scooter  
Year of manufacturing: 2020 

 

 
 

 

Note: ONLY use the supplied charger labelled XHK-922B-29415 with the following output voltage to charge this Electric 
scooter:29.4V – 1.5A. 

 

Using another charger may damage the product or create other potential risks. 

 

Never charge the product without supervision. 

 

The charging period of the product should not exceed four hours. Stop charging after four hours. 

 

The product should only be charged in temperatures between 0°C and 45°C. 

 

If charging at lower or higher temperatures, there is a risk that the performance of the battery will be reduced and a potential risk 
of damage to the product and personal injury. 

 

The product should only be used in temperatures between -10°C and +45°C. 

 

If used at lower or higher temperatures, there is a risk that the performance of the battery will be reduced and a potential risk of 
damage to the product and personal injury 

 

Store the product at temperatures between 0°C and 35°C. (optimum storage temperature is 25°C) 

 

Charge and store the product in an open, dry area and away from flammable materials (i.e. materials that may burst into flames). 

 

Do not charge in sunlight or near open fire. 

 

Do not charge the product immediately after use. Let the product cool down for one hour before charging. 

 

If the product is left with other persons for example during a holiday period, it should be partially charged (20-50% charged). 
Not fully charged. 

 

Do not remove the product from the packaging, charge it fully and then put it back into the packaging. 

 

When shipped from the factory, the product has often been partially charged. Keep the product in a partially charged state, until 
it is going to be used. 

 
DENVER ELECTRONICS A/S 
Omega 5A, Soeften, 8382 Hinnerup, Denmark 

www.denver-electronics.com

  

 

 

 

Содержание SEL-65110





















Отзывы: