15
Familiarize yourself with the vehicle before you use it so that you can keep the Electric scooter in sound condition.
•
Observe all safety instructions when riding the Electric scooter.
•
The Electric scooter is designed only for personal entertainment. Avoid operating it on public roads/in road traffic.
•
Children, elderly people, and pregnant women are not allowed to ride the vehicle.
•
People with limited sense of balance are not allowed to ride the Electric scooter.
•
Avoid riding the Electric scooter under the influence of alcohol or other substances.
•
Do not carry any objects while riding.
•
Make sure you have a clear vision in front of you to ride the Electric scooter safely.
•
While riding, your feet must always be on the foot board.
•
The Electric scooter can accommodate only one person.
•
Do not start or stop abruptly.
•
Avoid riding on steep slopes.
•
Stop riding the Electric scooter if you hit against a solid object (such as a wall or other structure) with it.
•
Do not ride in dimly lit or dark places.
•
Ride the Electric scooter at your own risk, we assume no liability for accidents or damage.
•
Ride at a safe speed that allows you to stop at any time.
•
Keep the Electric scooter at a sufficient distance from other people and avoid collisions.
•
Steer through balance shifting, fast movement can result in falls.
•
Do not ride in rain or under other wet conditions. Ride only in dry weather.
•
Avoid riding over obstacles, if possible, and avoid snow, ice, and slippery surfaces.
•
Avoid riding over textiles, small branches, and stones, if possible.
•
Avoid riding in narrow places or in places with obstacles, if possible.
•
Jumping on and off the Electric scooter will cause damage that is not covered by the warranty. There is a risk of injury. Injuries
and damage due to "trick riding" are not covered by the warranty.
13.6
Charging
•
Make sure that the Electric scooter, charger, and DC power input of the device are always dry.
•
Note: To charge this Electric scooter, use SOLELY the supplied XHK-922B-29415 charger with the following output: 29.4 V -
1.5 A.
•
Using a different charger may cause damage to the device and other potential risks.
•
Use the mains adapter to plug the DC input of the device into a conventional socket.
•
There will be no light on the charger before charging, when connected to e-scooter the adapter will light red, and charging has
started.
•
The red indicator lights up when properly charged; if this is not the case, please check the connections.
•
When fully charged, will the light on the charger turn off.Now you can stop the charging cycle. Overcharge shortens the battery
life.
•
The charging process takes up to 3 hours. Do not charge the battery for more than 3 hours. After 3 hours, disconnect the charger
from the device and the power supply. Overcharge reduces the battery service life.
•
The product must not be charged over extended periods.
•
Always keep an eye on the device throughout the charging cycle.
•
Charge the device only at temperatures between 0 °C and +45 °C.
•
When charging at lower or higher temperatures, there is a risk that the battery performance will be reduced; therefore, there is a
potential risk of injuries and material damage.
•
Store and charge the device in an open, dry area away from combustible materials.
•
Do not charge the device in direct sunlight or in the vicinity of open flames.
•
Do not charge the device immediately after use. Allow the device to cool down for an hour before charging it.
•
If the device is left to other people, it must be charged partially (20 - 50%), not fully.
•
Do not remove the device from its package to fully charge it and then put it back in the package.
•
The device is generally partially charged as shipped from the factory. Keep the device partially charged until it is used.
•
Allow the Electric scooter to cool down for at least 1 hour before it can be put in the package.
•
Do not leave the device exposed to sunlight in a car.
The Electric scooter must not be used during the charging cycle!
•
The LED indicator on the battery charger lights red during the charging process.
•
The LED indicator on the charger will light green when the charging process is complete.
•
After charging, disconnect the charger from the mains and the Electric scooter.
Connect the DC cable supplied with the Electric scooter only to the DC input!
•
Do not insert foreign bodies into the DC input.
CAUTION
CAUTION
