RADIO OPERATION
E-5
AUTOMATIC TUNING
MANUAL TUNING
It is for selecting stations, which cannot be tuned automatically. (manual selection)
To tune a channel manually.
- Press the function button to select “TUNER” mode.
- Press the “SKIP +” or “SKIP -” button is pressed momentarily (0.5 second or less),
the frequency changes by a fixed step:
FM: 0.05 MHz steps
1. Press the “FUNCTION” button to select “TUNER” mode.
2. Press and hold the “SKIP +” or “SKIP -” button for 2 sec. to start automatic tuning process.
3. When a station is tuned in the tuning process, it will stop automatically and you can listen to
your desired station.
MEMORY PRESET
1. Repeat step 1 to 3 in the AUTOMATIC TUNING procedures.
2. Press the “MEMORY / MODE” button to start the preset process.
3. Display will show the memory sequence number and a flashing “1”.
4. Press the “PRE-DN” or “PRE-UP” button or the “MEMORY / MODE” button of front panel to
determine the preset station number.
5. Press again the “MEMORY / MODE” button to preset your desired station.
6. Once all the stations were preset, press the “PRE-DN” or “PRE-UP” button on remote to listen to
your desired station.
MONO / STEREO
Press the “MONO / ST.” button to achieve the best frequency.
