TIMER SETTING
Timer setting must be after completed clock setting.
1. Press the “STANDBY” button to switch unit at standby mode.
2. Press the “TIMER” button to entry timer set mode.
3. The display will show “TIMER ON”, and AM 12:00 or PM 12:00 if 12H format is set or 00:00 if
4. Adjust hour by pressing the “SKIP +” or “SKIP -” button, press the “TIMER” button to confirm.
5. Adjust minute by pressing the “SKIP +” or “SKIP -” button, press the “TIMER” button to confirm.
6. The display will show “TIMER OFF”, and AM 12:00 or PM 12:00 if 12H format is set or 00:00 if
7. Adjust hour by pressing the “SKIP +” or “SKIP -” button, press the “TIMER” button to confirm.
8. Adjust minute by pressing the “SKIP +” or “SKIP -” button, press the “TIMER” button to confirm.
9. The display show input source by pressing “SKIP +” or “SKIP -” (Chose CD, USB, CARD, i-Pod
or Tuner). Chose the input and press “TIMER” button to confirm the selection.
10.The display show volume level pressing “SKIP +” or “SKIP -” to adjust the volume level and press
“TIMER” button to confirm the selection.
11.After confirmation the unit display show “TIMER ON TIME”, “TIMER OFF TIME”, “INPUT SOURCE”
and “VOLUME LEVEL” and unit go to standby mode.
12.Press the “TIMER” button to activate timer on / off function.
13.If you want to adjust the timer, press and hold “TIMER” button for 2 sec. It go to timer setting mode.
Follow steps from 4.
14.Press and hold the “PLAY / PAUSE” button over 5 sec. to cancel all timer setting.
Follow steps from 4.
OTHER FEATURES
CLOCK SETTING
1. Press the “STANDBY” button to switch unit at standby mode.
2. Press the “CLOCK” button once to entry clock set mode. The display will show “24H” and
flashing.
3. Adjust time format ( 12H / 24H ) by pressing the “SKIP +” or “SKIP -” button.
4. Press the “CLOCK” button to confirm time format, display will show “AM 12:00” or “PM 12:00” if
12H format is set or “00:00” if 24H set.
5. Adjust hour by pressing the “SKIP +” or “SKIP -” button, press the “CLOCK” button to confirm.
6. Adjust minute by pressing the “SKIP +” or “SKIP -” button, press the “CLOCK” button to confirm.
Notes:
Because clock setting is at standby mode, the display is dim.
E-11
